Plate-frame filter press is a mature dewatering equipment, which is widely used in sludge dewatering projects in Europe and America. The filter press arranges the filter plates and the filter frames in parallel and alternately, and the filter cloth is clamped between the filter plate and the filter frame in each group.
Use a spatula to scrape cake off the surface. Cake buildup can cause bending of the press frame. Excessive bending can lead to equipment failure! Keep the filter cloths and filter plates as clean as possible, especially along the sealing surface. Keep the following in mind when scraping cloths:
Belt filter press is popular slurry dehydration equipment, which can be classified into rotary drum thickening belt filter press and belts thickening belt filter press according to different design of thickening system. The rotary drum thickening system is to remove the liquid while rotating, after that the slurry will go to squeeze zone for further squeezing.
Before the introduction, I will correct a mistake for some people who don’t know the working processing of the filter press. They think the filtering of filter press is based on the closing pressure of the machine. But this is wrong, in fact the filtering of the filter press is actually based on the feeding pressure of the feeding pump, it means the higher the feeding pressure, the lower cake moisture.
Under the present situation of environmental protection, the requirement of environmental protection equipment in the market is increasing, especially in sewage treatment industry. Manufacturers develop new sludge dewatering equipments by continuous
This depends on your process. Cloth selection is as much an art as it is a science. Based on our combined experience and lab testing, we can make an expert recommendation to you. We supply cloths based on criteria you give us and based on sample processing we do in our lab. Should your process change, we recommend that your cloth type be evaluated for suitability.
Customers are our pilots, service is our heart. What customers demand is what we are trying to create, and what makes customers satisfied is what we are pursuing all the time.
Please enter your question and contact information.we will get back to you as soon as possible!